|
<% If Session("testom") = True Then %>
<% Else %>
<% End if %>
|
|
|
|
|
|
Description: |
Testing
for paper and board is fully supported on Testometric's
machines. Tests including tensile tests, wet strength
and puncture of tissue are included. Board tests include
flat, ring edge and concora crush testing, flexure and
pin adhesion tests. Accessories for paper testing include
a wide range of grips and fixtures for paper testing
and all are compliant to International standards. |
Standards:- |
Tensile:- ENISO
1924-2, ASTM D828, BS 4415, 2782, DIN 53112, JIS P8115,
TAPPI T494 Tear:- ASTM
D 1938 Peel:- ISO
4578, ASTM D903, D3330, D1000, BS 3887, F88 Compression:- ISO
9895, BS 7325, DIN 54518, TAPPI T826 Puncture:- ISO
3303-A, ASTM D3787, D5748 Friction:- ASTM
D 1894, BS 2782 |
The International Standards
above are a selection of the standards currently available.
|
Machines:
AT
Models:- M250-2.5AT, M250-3AT, or M350-5AT.
CT Models:- M250-2.5CT, M250-3CT or M350-5CT.
The CT is fully automated using a standard PC and dedicated winTest software. |
|
Tensile
Grips
A range of manual and pneumatic grips
is available for all types of paper testing. |
|
|
Wet
Strength Fixture
Special fixtures are available for wet
strength testing of paper, tissue etc. |
|
|
Friction
Grip
Friction slides are available to measure
static and dynamic coefficient of friction on paper,
films and printed material. |
|
|
Zero
Span Grip
A special fixture is available for conducting
zero gauge length tensile test. |
|
|
|
|
|
|
|
<% If Session("testom") = True Then %>
<% Else %>
<% End if %>
|
