Product Configurator

Testometric > Product Configurator

Testometric Product Configurator

"*" indicates required fields

Step 1 of 5

Industry & Material Selection. Please Choose your Industry or Material Below:

Industry / Application*

Packaging*

Containers*

Cardboard Boxes*

Paper*

Construction*

Metals*

Textiles*

Geotextiles/Geomembranes*

Plastics*

Elastomers*

Springs*

Please choose base material type:

If other, please specify your product/material here:

At the moment, we don't have a fixed configuration based on your needs. However, once you have submitted this form, we will get in touch with you to quote a configuration which does meets your requirements.

We have a product set that matches your criteria. Once you have submitted this request, you will be taken to some recommended products. This initial configuration is based on some typical requirements of the industry selected and our team will take any additional test or force capacity requirements into consideration when building your quote. These suggested products are a guide for you and we will still contact you with a comprehensive quote based for any criteria that you have requested and specifed in this configurator.

Base Machine: X350 5kN (X350-5)
Accessories: Spring Tensile Grips, up to 10kN (STG1)

Base Machine: X350 3kN (X350-3)
Accessories: 150mm square compression platens. Maximum capacity up to 25kN (CPS150-25)

Base Machine: X500 50kN (X500-50)
Accessories: 300mm square compression platens. Maximum capacity up to 50kN (CPS300-50)

Base Machine: X250 2.5kN (X250-2.5)
Grips & Fixtures : 1kN Pneumatic Grips (PN1), Friction Testing Fixture (FS1)
Accessories: Pneumatic Foot Switch (PF) (to control the Pneumatic Grips)

Base Machine: X100 Coefficient of Friction Kit (X100-COF)

Base Machine: X350 5kN (X350-5)
Grips & Fixtures : Parallel Platen Fixture (PP)
Grips & Fixtures : Parallel Platen Fixture (PP)
Accessories: Edge crush test holding blocks (ECT)
Accessories: Ring crush fixture (RCT)
Accessories: Fixed span 4 point bend fixture for paper & board (FB4/8)

Base Machine: Dedicated Box Compression Tester Kit, Capacity 25kN 800mm (X500-25BC-800)

Base Machine: Dedicated Box Compression Tester Kit, Capacity 25kN 600mm (X500-25BC-600)

Base Machine: Box Compression Tester, 1m to 1.5m Cube, 25kN to 50kN (XBC1000)

Box Compression Tester, 1m to 1.5m Cube, 25kN to 50kN (XBC1250)

Box Compression Tester, 1.5m Cube, 25kN to 50kN (XBC1500)

Machine: X250 Machine 2.5kN (X250-2.5)
Accessories: 150mm square compression platens 25kN. Maximum capacity 25kN to 300kN (CPS150-25)

Machine: Single column, bench-mounted Universal Testing Machine X250 Machine 2.5kN (X250-2.5)
Accessories: Container Lid Peel Fixture (YPP1)
Accessories: Pneumatic Grips (PN1)
Accessories: Pneumatic Foot Switch (PF)

Machine: X100 up to 1kN Bench Mounted Testing Machine (X100-1)
Accessories: Lightweight manual grips 15mm to 50mm (PG50)
Accessories: Friction Testing Fixture (FS1)

Machine: X100-1 up to Paper Z-Direction Testing (TAPPI T541 or ISO 15754)

Machine: X100-1 up to 1kN Bench Mounted Testing Machine (X100-1)
Accessories: Pneumatic Grips for Tissue, 50mm (PN1-50FFL)
Pneumatic footswitch (PF).

Machine: X100-1 up to 1kN Bench Mounted Testing Machine (X100-1)
Accessories: Pneumatic Grips for Tissue, 50mm (PN1-50FFL)
Pneumatic footswitch (PF).
Finch wet test fixture 25mm to 50mm ( FWS).

Machine: Dedicated tissue testing machine based on the X100-1 model, complete with fixtures for both wet and dry tests according to BS EN ISO 12625 or TAPPI T456 & T576 (X100-TT)

Machine: X100-1 up to 1kN Bench Mounted Testing Machine (X100-1)
Accessories: 90 to 180 Degree Peel Fixture (PL90, PL180)
Accessories: FINAT Tack Test Fixture (FT1)
Accessories: Lightweight manual grips 15mm to 50mm (PG50)
Accessories: FINAT Weighted specimen roller 2kg (FR1)

Machine: X100-1 up to 1kN Bench Mounted Testing Machine (X100-1)
Accessories: Lightweight manual grips 15mm to 50mm (PG25)

Machine: Dedicated Box Compression Tester. Capacity X350 5kN (X350-5)
Accessories: Adjustable span 4 point bend fixture for testing glass-fibre re-inforced concrete samples. (GRCBEND)

Machine: X500 Machine (X500-50).
Accessories: 3-Point Bend Fixture (VB310), Timber Hardness Fixture, 25kN to 50kN (TH), Tensile Adhesion Fixture (TA2), Parallel Tensile Fixture (TTP2)

Machine: X500 Machine (X500-25).
Accessories: 3-Point Bend Fixture (VB310), Timber Hardness Fixture, 25kN to 50kN (TH), Tensile Adhesion Fixture (TA2), Parallel Tensile Fixture (TTP2)

Machine: X500 Dual column, bench-mounted Universal Testing Machine, Capacity 25kN 800mm (X500-25).
Accessories: Variable span bend fixture for plywood (PBEND).
Accessories: Interlaminar Shear Fixture (ILS1037).
Accessories: Parallel Tensile Fixture (TTP2).

Machine: X350. Capacity 10kN (X350-10).
Accessories: Screw Pull-Out Fixture (TPO).
Accessories: Parallel Tensile Fixture (TTP2).
Accessories: Surface Soundness Fixture (TSS1).
Accessories: 3-Point Bend Fixture (VB310).</li

Machine: Floor standing twin column computer controlled universal strength testing machine. Maximum capacity 500kN (XFS500).
Accessories: 200mm square compression platens. Maximum capacity up to 500kN (CPS200-500).

Machine: Floor standing twin column computer controlled universal strength testing machine. Maximum capacity 300kN.(XFS300).
Accessories: 3-Point Bend Fixture (VB12390).

Machine: Bench mounted twin column computer controlled universal strength testing machine. Total maximum capacity 50kN (X500-50).
Accessories: Fixed span 3 point bend fixture for cast mortar prisms etc (FB1015).
Accessories: Dumbbell holders for mortar & cement (DH307).

Machine: Bench mounted twin column computer controlled universal strength testing machine. Total maximum capacity 50kN (X500-50).
Accessories: Tile Shear Fixture (TS12003).

Machine: Bench mounted twin column computer controlled universal strength testing machine. Total maximum capacity 50kN (X500-50).
Accessories: Pre-Tightening Wedge Grips, 50kN (PWG50).
Accessories: Pipe Tensile Grips, 25mm (PPTG).
Accessories: Long Travel Extensometer for rubber and other elastomers, with range of 850mm by 0.01mm. (DE-A)

Machine: X500 25kN Testing Machine (X500-25).
Accessories: P400mm square compression platens. Maximum capacity 25kN to 300kN. (CPS400).

Machine: Dedicated Box Compression Tester, Capacity 25kN 800mm (X500-25).
Accessories: Fixed span 4 point bend fixture for building glass. (FB1288-3).

Machine: X500 Machine (X500-25 to X500-50).
Accessories: Fixed span 4 point bend fixture for building glass (FB1288-3).

Machine: X350 Machine (X350-5)
Accessories: Net Roller Grips (YRN).

Machine: Bench mounted twin column computer controlled universal strength testing machine. Total maximum capacity 25kN (X500-25)
Accessories: 310mm square compression platens (CPS310).
Accessories: Universal Joint, 30kN (UJ1).

Machine: Bench mounted twin column computer controlled universal strength testing machine. Total maximum capacity 25kN (X500-25)
Accessories: Needle Grips 250mm (NTG250/500).
Accessories: 400mm square compression platens. Maximum capacity 25kN to 300kN. (CPS400).

Machine: Floor standing twin column computer controlled universal strength testing machine. Maximum capacity 1000kN (XFS1000)
Accessories: Hydraulic Wedge Grips, 1000kN (HWG).
Accessories: Hydraulic Pump, Double-Acting (HP-DA).
Accessories: Clip-on Extensometer for Rebar (TE3543-100).

Machine: X500 Machine (X500-50)
Accessories: Pre-Tightening Wedge Grips, 10kN to 300kN (PWG50).
Accessories: Clip-on Extensometer, 5mm to 10mm Range (TE3542).

Machine:X350 Machine (X350-5)
Accessories: Flat faced pneumatically operated grips with centreline adjustment. Sizes 3 to 6.(ACPN5).
Accessories: Pneumatic footswitch. (PF).

Machine: Floor standing twin column computer controlled universal strength testing machine. Maximum capacity 500kN. (XFS500)
Accessories: Hydraulic Wedge Grips, 500kN (HWG).
Accessories: Hydraulic Pump, Double-Acting (HP-DA).
Accessories: Clip-on Extensometer for Rebar (TE3543-100).

Machine: X500 Machine (X500-25)
Accessories: Pre-Tightening Wedge Grips, 10kN to 300kN (PWG25).
Accessories: Clip-on Extensometer, 5mm to 10mm Range (TE3542).

Machine: X350 Machine (X350-5)
Accessories: Flat faced pneumatically operated grips with centreline adjustment. Sizes 3 to 6. (ACPN5).
Accessories: Pneumatic footswitch. (PF).

Machine: X250 Machine (X250-2.5)
Accessories: Crimp pull off fixture. (CPO1).

Machine: Bench mounted twin column computer controlled universal strength testing machine. Total maximum capacity 25kN (X500-25)
Accessories: Pre-Tightening Wedge Grips, 10kN to 300kN (PWG25).
Accessories: Capstan & clamp grips 3kN to 100kN (CC3).

Machine: X250 Machine (X250-2.5)
Accessories: Flat faced pneumatically operated grips with centreline adjustment. Sizes 3 to 6. (ACPN).
Accessories: Pneumatic footswitch. (PF).
Accessories: Grab Test Inserts (GTI).

Machine: X350 Machine (X350-5)
Accessories: Flat faced pneumatically operated grips with centreline adjustment. Sizes 3 to 6. (ACPN5).
Accessories: Pneumatic footswitch. (PF).
Accessories: Grab Test Inserts (GTI).

Machine: X500 Machine (X500-25)
Accessories: Flat faced pneumatically operated grips with centreline adjustment. Sizes 3 to 7. (ACPN7).
Accessories: Pneumatic footswitch. (PF).

Machine: X250 Machine (X250-2.5)
Accessories: Flat faced pneumatically operated grips with centreline adjustment. Sizes 3 to 6. (ACPN).
Accessories: Pneumatic footswitch. (PF).
Accessories: Line Contact Inserts (LCI).
Accessories: Elastic loop grips. Size 1. (ELG1).

Machine: X100-1LT Machine (X100-1LT)
Accessories: Flat faced pneumatically operated grips with centreline adjustment. Sizes 3 to 6. (ACPN3).
Accessories: Pneumatic footswitch. (PF).
Accessories: Ball-burst fixture. Size 1. (BB1).

Machine: X500 Machine (X500-50)
Accessories: Webbing Grips 50-200kN (WEB1).

Machine: Floor standing twin column computer controlled universal strength testing machine. Maximum capacity 1000kN. (XFS150)
Accessories: Webbing Grips 50-200kN (WEB3).

Machine: X250 Machine (X250-2.5)
Accessories: Pneumatic Yarn Grips, 500N to 5kN (PST2).
Accessories: Pneumatic footswitch (PF).
Accessories: Bollard grips. Maximum capacity 2.5kN to 5kN (BG1).

Machine: X350 Machine (X350-5)
Accessories: Pneumatic Yarn Grips, 500N to 5kN (PST3).
Accessories: Pneumatic footswitch (PF).
Accessories: Capstan & clamp grips 3kN to 100kN (CC2).

Machine: X350 Machine (X350-5 to X350-20)
Accessories: Capstan & clamp grips 3kN to 100kN (CC3).

Machine: Dedicated fibre testing machine based on the X100-1 model, complete with pneumatically operated grips for testing natural or synthetic single fibres according to BS EN ISO 5079 or BS 3411. (X100-FT)

Machine: X250 Machine (X250-2.5)
Accessories: Zip Fastener Grips (Z1)
Accessories: Zip Pull-Off Grips (Z2)

Machine: X250 Machine (X250-2.5)
Accessories: Flat faced pneumatically operated grips with centreline adjustment. Sizes 3 to 6. (ACPN4)
Accessories: Pneumatic footswitch. (PF)
Accessories: Button/eye pull-off fixture. (BPE)
Accessories: Button pull-off fixture. (BP1)

Machine: X250 2.5kN Machine (X250-25)
Accessories: Multi-Jaw Fixture (PPO1).
Accessories: Base clamp assembly for holding fabric/garments (PCB1).

Machine: X250 Machine (X250-2.5)
Accessories: Pair of single eccentric roller grips. Maximum capacity 2.5kN to 10kN.(ER1FF)
Accessories: Tuft Withdrawal Fixture (TW).

Machine: X250 Machine (X250-2.5)
Accessories: Flat faced pneumatically operated grips with centreline adjustment. Sizes 3 to 6. (ACPN4).
Accessories: Pneumatic footswitch (PF).
Accessories: Leather Peel Fixture (LP1) and (LP2).
Accessories: Leather stitch tear fixture DIN 53331, ISO 23910 (LT1).
Accessories: Leather stitch tear fixture DIN 53331, ISO 23910 (LT2).

Machine: X350 Machine (X350-5)
Accessories: Single grip for shoes. (BS1).
Accessories: Shoe Peel Grip, 1kN to 2.5kN (SP1/2).
Accessories: Ball-burst fixture size 4. (BB4).

Machine: Floor standing twin column computer controlled universal strength testing machine. Maximum capacity 1000kN (XFS150)
Accessories: Heavy-duty hydraulic grips, 150kN(HG150).
Accessories: Hydraulic Pump, Single-Acting (HP-SA).

Machine: X500 Machine (X500-50)
Accessories: Heavy-duty hydraulic grips, 25kN to 300kN (HG50).
Accessories: Hydraulic Pump, Single-Acting (HP-SA).

Machine: X500 Machine (X500-50)
Accessories: PR9 - CBR Puncture Fixture (PR9).
Accessories: HP-SA - Hydraulic Pump, Single-Acting (HP-SA).

Machine: X350 Machine (X350-10)
Accessories: Flat faced pneumatically operated grips with centreline adjustment. Sizes 3 to 6 (ACPN6).
Accessories: Pneumatic footswitch (PF).

Machine: X350 Machine (X350-10)
Accessories: Flat faced pneumatically operated grips with centreline adjustment. Sizes 3 to 6 (ACPN6).
Accessories: Pneumatic footswitch (PF).
Node Grip Faces 100mm (NGF).

Machine: X350 Machine (X350-5)
Accessories: Double eccentric roller grips. Size 1 (DER1).
Accessories: Long Travel Extensometer for rubber and other elastomers, with range of 850mm by 0.01mm (DE-A3).

Machine: X350 Machine (X350-10)
Accessories: Pre-Tightening Wedge Grips, 10kN to 300kN (PWG10).
Accessories: Combined extensometer with transducer for accurate low extension readings and encoders for high extension. (10x1000).
Accessories: Clip-on Extensometer, 5mm to 10mm Range (TE3542).

Machine: X250 Machine (X250-2.5)
Accessories: Pneumatic Grips (PN1).
Accessories: Friction testing fixture (FS1).

Machine: X350 Machine (X500-50)
Accessories: Self-Tightening Roller Grips, 25mm to 50mm (STR1).
Accessories: Long Travel Extensometer for rubber and other elastomers, with range of 850mm by 0.01mm. (DE-A3).

Machine: X350 Machine (X500-50)
Accessories: Indentation Hardness Fixture (INDHARD).
Accessories: Wide Frame Modification for X350 (WFX350).

Machine: X250 Machine (X250-2.5)
Accessories: Self-Tightening Roller Grips, 25mm to 50mm (STR1).
Accessories: Long Travel Extensometer for rubber and other elastomers, with range of 850mm by 0.01mm. (DE-A3).

Machine: X250 Machine (X250-2.5)
Accessories: Self-Tightening Roller Grips, 25mm to 50mm (STR1).
Accessories: Long Travel Extensometer for rubber and other elastomers, with range of 850mm by 0.01mm. (DE-A3).

Machine: X250 Machine (X250-2.5)
Accessories: Self-Tightening Roller Grips, 25mm to 50mm (STR1).
Accessories: Long Travel Extensometer for rubber and other elastomers, with range of 850mm by 0.01mm. (DE-A3).
Accessories: Puncture Fixture (PR2).

Base Machine: X500 50kN (X500-50)
Accessories: 300mm square compression platens. Maximum capacity up to 50kN (CPS300-50)

Base Machine: X350 5kN (X350-5)
Accessories: 150mm square compression platens. Maximum capacity up to 25kN (CPS150-25)

Machine: X350 5kN Machine (X350-5)
Accessories: Spring Tensile Grips, 10kN to 100kN (STG)

How would you like to be contacted?

Phone

Request a call back

When would you like us to call you back?

Any additional information you would like to add:

52071

Product Configurator

Testometric Product Configurator

Industry & Material Selection. Please Choose your Industry or Material Below:

Please enter your information below to complete our Product Configurator and view your output:

Quote Request